Advantages:
- Guaranteed effect after fungicidal treatment
- Integrated approach at all stages of fungicidal treatment of hatchery, transport, production facilities.
- To introduce animals and birds in the room after 30 minutes after treatment fungicide means Policlin
Fumiklin solution as a fungicidal component contains enilconazole - 150 mg/ml and excipients. In appearance, the tool is a liquid from light yellow to dark yellow with a brownish or brown tint.
Fungicidal agent Fumiklin solution has a wide spectrum trom antifungal action against fungi and yeast, including Aspergillus spp., Microsporum spp., Trichophyton spp ., Candida alblcans, Cladosporium spp., Alternaria alternata, Mucor, Trichoderma.
The mechanism of action of enylconazole is selective inhibition of biosynthesis of ergosterol, which leads to a change in the permeability of the glue of the exact wall of microorganisms with their subsequent death.
Recommendations for use.
Fungicidal agent Fumiklin solution is used for disinfection of premises, bedding, incubators, Hatcher cabinets, feeders, cages, nests, drinkers, engineering services in the poultry and animal ing the premises, the rabbit breeding farms and stables, contamination Gris Bami, including Aspergillus spp., Trichophyton verrucosum, T. mentagrophytes, T. equinum, Microsporum canis, M gypseum.Before disinfection, it is necessary to carry out a thorough mechanical cleaning of the room, isolate the room, turn off the ventilation. For processing use any spraying device (installation of cold or hot fog and other aerosol installations) or wet cleaning.
Treatment is carried out in the absence of animals and birds.
Before dilution, the contents of the package are thoroughly shaken. For wet cleaning and coarse spraying (knapsack sprayers, etc.), 0.1% working emulsion is used (100 ml of the product is dissolved in 99.9 liters of water), when using hot or cold fog units, 1% working emulsion is used (1 liter of the product is dissolved in 99 liters of water heated to 40-50°C). The prepared working emulsion should be used within 30 minutes.
Depending on the surface profile, the exposure ranges from 30 minutes to 12 hours (smooth and rough). The working emulsion is used at a temperature not lower than 50C with the rate of flow specified in the table.
Processing object |
% of the working emulsion | Processing method | Quantity of working emulsion | Multiplicity of processing |
Incubators, hatchery cabinets
|
0,1 |
Wet cleaning, coarse spraying |
150 ml/m2 or 30 ml/m3
|
Twice at an interval of 48 hours before incubation, and before and after collection of chicks |
1 |
Installations of hot or cold fog
|
15 ml/m2 or 3 ml/m3
|
||
Poultry, stables, livestock and fur farms, feeders, warehouses, vehicles, litter and equipment
|
Wet cleaning, coarse spraying
|
300 ml/m2 or 80 ml/m3
|
Twice with an interval of 48 hours. Crawfish farms are treated 3 times a week at intervals of 48 hours for 1-3 weeks.
|
|
Installations of hot or cold fog
|
30 ml/m2 or 8 ml/m3
|
After the set exposure processing feeders and drinkers washed with water. With the rest of the surface flushing residue is not required. Animals and birds are introduced into the room after ventilation after 30 minutes.